Montana Cans Primer Sprays (400ml)

$13.75 - $14.03
Zoom the image with the mouse

Montana Cans Primer Sprays (400ml)

$13.75 - $14.03

METAL: The Montana METAL PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto meta…

Adding to cart… The item has been added

Montana Cans Primer Sprays (400ml)

$13.75 - $14.03

Montana Cans Primer Sprays (400ml)

$13.75 - $14.03
3 customers are viewing this product
  • Security Image 1
Description

METAL:

The Montana METAL PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto metal surfaces. With anti-oxidation properties to help resist the onset of rust, the METAL PRIMER has a matt finish and gives your metal project the longest possible lifespan, with the highest aesthetic results. Applying METAL PRIMER to your artwork or D.I.Y project will create the best possible adhesion and protection for further coatings like Montana GOLD, Montana BLACK or Montana WHITE range colors. The METAL PRIMER will also provide further protection against scratching and denting. The METAL PRIMER was developed for optimal pre-treatment of metal (Iron or brass) and mineral surfaces. Ensuring that your surface is clean, dry and free of all dust and oils before application will ensure that your Montana METAL PRIMER provides the ultimate base for further coatings. Further coating is possible with the Montana TECH, and Montana Cans color ranges. Smooth, even application is effortless thanks to the Montana FLAT JET CAP Medium, that comes standard on the can. For further application caps, why not try the FLAT JET WIDE, the FAT CAP GOLD/BLACK or any of the Montana LEVEL 1-3 caps. It is important to allow complete curing of the METAL PRIMER (24 hours or more), before applying further coatings. We suggest trialing on a non-visible area of your material to test for compatibility. Please note the Metal Primer unsuitable for priming aluminum.

USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.

POLYSTYRENE

The Montana POLYSTYRENE PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto polystyrene and styrofoam based surfaces. The Montana POLYSTYRENE PRIMER is ideal for sealing and preparing polystyrene and styrofoam based materials for the efficient application of further color coats. The POLYSTYRENE PRIMER assists in adhesion, maximizes coverage of further coatings, seals porous surfaces and resists against agitation of further solvent based coatings when all surface holes are covered. The Montana PLASTIC PRIMER also increases the durability of polystyrene/ Styrofoam surfaces once coated. Due to the varied chemical make-up of polystyrene, we suggest trialing on a non-visible area of your material to test for compatibility. You can apply any Montana-Cans color,TECH or EFFECT spray over the POLYSTYRENE PRIMER once it has dried and cured. Montana POLYSTYRENE PRIMER will increase the intensity and longevity of the coatings applied over it. Curing time is 24 or more hours depending on ambient temperature and moisture levels. The Montana POLYSTYRENE PRIMER is a beige/brown colored, matte coating, in a Nitro-Combi based composition which achieves a relatively neutral color base for the application of any of the Montana GOLD, Montana BLACK or Montana WHITE color range. Smooth, even application is effortless thanks to the Montana FLAT JET Medium cap which is standard on the can. To vary the spray application, why not try the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or any of the Montana LEVEL 1-3 caps. Remember to keep your polystyrene projects away from extreme heat or flames. Ensure all surfaces are completely sealed and air holes closed coated. The rougher and more air holes the substrate has, the more coats of POLYSTYRENE PRIMER required for complete protection against further solvent based color coatings.

USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.

PLASTIC

The Montana PLASTIC PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto plastic surfaces. PLASTIC PRIMER is ideal for sealing and preparing plastic materials for the efficient application of color coats. The PLASTIC PRIMER assists in adhesion, maximize coverage of further coatings, seals porous surfaces and reduces the risk of tearing and cracking. Montana PLASTIC PRIMER is a surface preparer that can be used on hard plastics such as: polyurethane (PUR), polystyrene (PS), polyamide (PA), polypropylene rubber, modified (EPDM), acrylic butadiene styrene plastics (ABS), glass-fibre reinforced plastics (GfK), hard polyvinyl chloride (Hard-PVC). Due to the varied chemical make-up of plastics we suggest trialing on a non-visible area of your material to test for compatibility. You can apply any Montana-Cans color, TECH or EFFECT spray over the PLASTIC PRIMER once it has dried and cured. Montana PLASTIC PRIMER will increase the intensity and longevity of the coatings applied over it. Curing time is 24 or more hours depending on ambient temperature and moisture levels. The Montana PLASTIC PRIMER is a semi gloss, transparent white in color in the form of a Nitro-Combi based coating which achieves a neutral color base for the application of any of the Montana GOLD, Montana BLACK or Montana WHITE color range. Smooth, even application is effortless thanks to the Montana FLAT JET Medium cap which is standard on the can. To vary the spray stroke application why not try the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or any of the Montana LEVEL 1-3 caps. Due to possible expansion and contraction of all plastics, for best results remember to keep your plastic projects out of extreme weather conditions or temperature changes. Ensure all surfaces are clean, dry and free of all dust and oils before applying the PLASTIC PRIMER. The Montana PLASTIC PRIMER is not recommended for use with soft plastics.

USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.

 

ALUMINIUM

The Montana PRIMER 400ml - ALUMINIUM T2450 creates a neutral surface on aluminium in preparation for further coating with acrylic, NC (nitro-combi) or synthetic-based lacquers. With built-in properties to resist against flaking and cracking on aluminium, the ALUMINIUM PRIMER is light grey in color with a matt finish that will give your aluminium coatings the longest possible lifespan with the highest aesthetic results. Applying ALUMINIUM PRIMER promotes premium adhesion to your artwork, objects or D.I.Y projects for the application of Montana GOLD, Montana BLACK, Montana WHITE, Montana TECH, and EFFECT coatings. With limitations, the ALUMINIUM PRIMER can also offer similar protection on copper and zinc. For best results pre-sand surfaces with fine sandpaper and ensure that your surface is clean, dry and free of all dust and oils before application. Further coating is also possible with the Montana TECH, EFFECT, and Montana Cans color ranges. Smooth, even application is effortless thanks to its medium pressure and Montana FLAT JET CAP Medium, which comes standard on the can. For further application caps, why not try others from the FLAT JET cap range. We suggest trialing on a non-visible area of your material to test for compatibility.

USE: Shake can vigorously for 2-3 minutes before use. Apply ALUMINIUM PRIMER in several thin layers, spraying in sweeping motions. Allow 5 minutes to dry between coats. Coating with colors can take place after 2-4 hours of drying time. Further coats of alternative products might require a drying time of 24 hours or more depending on the coating. Always test spray on a non-visible area to check the compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.

UNIVERSAL

The Montana UNIVERSAL PRIMER is the perfect tool for the job when you want to create a neutral surface of which to apply further coatings onto. As an all rounder of the Montana PRIMER range, the UNIVERSAL PRIMER is the primer for those who just want one primer for varied surfaces. The Montana UNIVERSAL PRIMER is ideal for sealing and preparing surfaces for the efficient application of further color coats. The UNIVERSAL PRIMER assists in adhesion, maximizes coverage of further coatings, seals porous surfaces and protects from the elements. It offers resistance against rust, a smooth surface to work on and generally prepare and protect a substrate for further coating. The Montana UNIVERSAL also increases the durability of surfaces once coated. We suggest trialing on a non-visible area of your material to test for compatibility. You can apply any Montana-Cans color,TECH or EFFECT spray over the UNIVERSAL PRIMER once it has dried and cured. Montana UNIVERSAL PRIMER will increase the intensity and longevity of the coatings applied over it. Curing time is 24 or more hours depending on ambient temperature and moisture levels. The Montana UNIVERSAL PRIMER is a white colored, semi gloss coating, in a Nitro-Combi based composition which achieves a neutral color base for the application of any of the Montana GOLD, Montana BLACK or Montana WHITE color range. Montana UNIVERSAL PRIMER can be applied to wood, metal, firm paper, cardboard, concrete, ceramic and other materials. Smooth, even application is effortless thanks to the Montana FLAT JET Medium cap which is standard on the can. To vary the spray application, why not try the Montana FLAT JET WIDE, the FAT CAP GOLD/BLACK or any of the Montana LEVEL 1-3 caps. Ensure all surfaces are completely clean and free of dust, oils and rust. In cases where rust is present, ensure all rust is removed before application.

USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.

Bottom Banner